Sheath of flexible thermocouple is drawn by special stainless steel in special process, so it is muchsofter thantraditional ones, but the performance is same, despite of flexibility. Flexible thermocouple can be inserted intozigzag thermowell and measure temperature of various structure inner the reactor.
The spring structure makes measuring end of spring loaded thermocouple or RTD adiustable. The adjustablerange of insertion length is about 15mm. Measuring end sticks to top of thermowell, making measurement fastand accurate. Spring loaded thermocouple or RTD is applicable to all kinds of thermowell.
It is suitable for temperature measurement of rotary kiln and other equipment, and the wireless temperature measurement system can transmit the temperature measurement signal remotely and wirelessly, and the wireless receiver has a display function.
It is used for direct measurement of various medium and high pressure small diameter (DN15~DN150) pipes.
It is suitable for temperature measurement and control in ultra-high pressure places in the production process of petroleum and chemical industry, especially in high-pressure polyethylene production equipment. The product is welded and sealed with double-layer packing, which can be used under 300MPa working condition for a long time.
Sectional connection can be used, the high temperature section uses a metal armor layer, and the non-hightemperature section can use high temperature compensation wire excess.
polypropylene (PP) plant reactor; It has a double-layer leak-proof structure; The measuring end is in direct contact with the medium, with fast response and high precision; The thermal response time is τ0.5<3s.
Thermowell of chemical fiber purpose RTD has a shrink structure. lt is thin in measuring end, so the sensortouches media wel, making measurement fast-response and accurate. Chemical fiber purpose RTD matchesthe requirement of low pressure and high accuracy in chemical fiber industry.
RTD Inside of measuring end Special cling structure (patented technology), it is applicable to occasion ofintense vibration.
With scale on the thermowell, thermocouple or RTD is applicable to the occasion of low tightness.Insertion length is adjustable by movable compression thread.
Right-angle thermocouple is applicable to high temperature production field. On occasions that gasesdo harm to connection head or thermocouple can not be installed horizontally or vertically, right-anglethermocouple is also suitable. Process connection: movable flange or movable compression thread.
Indoor thermometer is applicable to cold storage, oasthouse, thermostatic chamber, air-conditioned roomcommunications room, warehouse and other indoor or outdoor room which needs to control measurementIt measures accurately and is easy to install.
The casing or component of the corrosion-resistant thermocouple (resistance) is wrapped in polytetrafluoroethylene, known as the "king of plastics." It is resistant to the corrosion of most acids, alkalis, and organic substances. With a temperature measurement range of <200°C, it can replace expensive metal protective tubes such as high-nickel alloys, titanium, and tantalum. It has advantages such as low cost and ease of processing.
Linear dynamic surface thermocouples (temperature measuring cables or thermal cables) are used for temperature measurement and early warning on the surface of coal-water slurry gasifiers.
The sheath covered with refractory fibers, the reinforced blade thermocouple is more anti-corrosive and has a longer lifetime
Hoop thermocouple or RTD is applicable to measure temperature of pipel ine outer surface.
Surface thermocouple or RTD is applicable to surface temperature measurement of pipes, reactors and furnaces, with different forms of measuring end and fixed modes based on diferent equipments andenvironments, such as blade-type, wafer, hold hoop, clamp-on etc.
A multi-point flexible thermocouple suitable for temperature measurement in butanediol (BDOsynthesis reactors, with a maximum operating pressure rating of 2500 # (design pressure of 34.8MPaand design temperature of 204 '℃), and equipped with a pressure instrument for leakage detection.
It is used in coal-water slurry water-cooled wall gasifier (Tsinghua furnace, Jinhua furnace, Luxi furnace, etc.); There are 3 temperature sensors, two K-type and one B-type, the K type is used to measure the temperature of the annular cavity and the water wall temperature, and the B type is used to measure the temperature of the furnace combustion chamber, and the double-layer anti-leakage and detachable structure are set.
Our company has a variety of multi-point thermocouples suitable for ethylene glycol reactors. According to the process requirements, it can be divided into: single branch multi-point, multi-branch multi-point; Fixed, core-pullable, leak-proof and so on.
It is suitable for temperature measurement inside various reactors, especially hydrogenation reactors, with multiple independent casings fixed with T-beam brackets to prevent casing from bending, and equipped with sealing chambers and leakage detection pressure gauges.
The cross-shaped temperature measurement thermocouple is a product developed by our company for measuring the temperature at the top of the blast furnace. Four sets of thermocouples are arranged in a cross layout, allowing for maintenance and replacement of thermocouples without shutting down the furnace. The thermocouple is held firmly against the inner wall of the casing by a spring, ensuring more accurate temperature measurement and more sensitive response.
The thermocouple is flexible and can be bent. The product uses three different sealing methods and a four-layer leak-proof structure, with a double-layer independent sealing chamber. It is also equipped with a pressure gauge or pressure sensor for monitoring.
The multipoint thermocouple is sealed with high-pressure sealing filler and metal compression fittings. A protective cover is installed beneath the flange surface to prevent the accumulation of dust at the flange root of the mounting tube from causing hydrogen embrittlement and corrosion of the thermocouple.
insertion depth can be adjusted ±250mm. The casing is a stainless steel bellows with a pressure resistance of 1MPa. The head is equipped with a fastening block for attaching to the hammer.
The single multi-point thermocouple produced by our company is a plurality of thermocouples in an armored tube, which is made by pulling the armor directly through the porous magnesium oxide column through multiple coupling wires, which has the advantages of flexibility, voltage resistance, leakage prevention, etc., and the thermocouple is a flexible structure.
RTD is flexible and bendable; The length of a single stick can reach up to 150m; With special mounting components, the thermal resistance in the interlayer in the storage tank, the inner and outer tank walls, the purge pipe, the bottom of the inner tank and other positions can be effectively installed and fixed
With special installation components, the RTD in the interlayer. inner andouter tank walls, purge pipe, and inner tank bottom can be effectivelyinstalled and fixed.With special installation components, the RTD in the interlayer. inner andouter tank walls, purge pipe, and inner tank bottom can be effectivelyinstalled and fixed.
The bimetallic thermometer is a field measurement instrument suitable for measuring medium and low temperatures, capable of directly measuring the temperature of gases, liquids, and steam. This thermometer is characterized by its low cost, easy installation, and the ability to read measurements on-site, making it a partial replacement for other types of measuring instruments. It is widely used in industries such as petroleum, chemical, steel, and power generation.
Can choose NPTthread and weld,full penetration weld or integration forged.
Tantalum is expensive and can not be bulld-up welded with other stainless steel. So thermowell is separated from flange,which has a sealing face of tantalum.
The electronic temperature and pressure switches use electronic circuits to replace the traditional mechanical structures of switches, avoiding inherent weaknesses such as value drift, large hysteresis, low setpoint accuracy, jamming, and oxidation failure of micro-switch contacts. The electronic temperature and pressure switches utilize high-precision electrical signal sensors as signal inputs and connect to DCS/PLC systems via a two-wire system, eliminating the need for additional power supply to achieve switch functionality. The electronic switches feature a digital display and input keys, enabling visual monitoring and custom configuration of switch parameters.
LT series temperature transmiter adopts HART bussing technique, which is a new generation of intelligent temperaturemodule and an indispensable field device in process control. The device integrates a weath offunctional modules, whichcan realize both general function detection and complex control stratecies. Wsing digital technology, it can be applied toa variety of RTD and thermocouple sensors. The interface between the field and the control room is simple, and the cosof installation, operation and maintenance can be greatly reduced.
